Optimizing Hybrid Perovskites for High-Efficiency Solar Energy
Main Article Content
Abstract
Our research explores hybrid perovskite solar cells, promising low-cost and high-efficiency photovoltaic solutions. Despite challenges, optimizations like interface engineering enhance performance for future commercial use. Study of different physical parameters with the help of SILVACO and MATLAB Simulink for cell modeling. Long-term stability and cost reductions are among the most significant challenges to broad commercialization Future research will be around trying different parameter values. There searcher said this project represents an important step forward in the development of hybrid perovskite solar cells, which could be a key partof a new wave of clean energy sources that are needed as global consumption levels continue to rise. The solar cells studied herein are detailed by the six-scan structure: Glass/Indium Tin Oxide (ITO) / Electron Transport Layer - (N layer) - Active Layer (Perovskite) - Hole transport_layer (Payer) - Metal Electrode; Glass/ITO/TiO2/Pero_Aardes Spiro-OMeTAD/Au. It delivers the energy conversion efficiency of 19.12% with a fill factor (FF) of 80.53%, an open-circuit voltage at Voc =1.14 Vandshort circuit current density Jsc=20.88 mA/cm²,respectively The active layer is a 0.25 
-thick CH3NH3PbI3 perovskite, and the TiO2 layer thickness was set at 0.02 
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
References
Abdelilah, Y., Bahar, H., Criswell, T., Bojek, P., Briens, F., & Feuvre, P. L. (2020). Renewables 2020: Analysis and Forecast to 2025. IEA: Paris, France.
Bouab, H., & Garn, M. (2022). Elaboration d’un plan de maintenance préventive PMP pour une installation solaire à grande dimensions (Doctoral dissertation, Université Ibn Khaldoun-Tiaret)
Dale, P. J., & Scarpulla, M. A. (2023). Efficiency versus effort: A better way to compare best photovoltaic research cell efficiencies. Solar Energy Materials and Solar Cells, 251, 112097.
Energiewende, A. (2015). Current and future cost of photovoltaics–long-term scenarios for market development system prices and LCOE of utility-scale PV systems. Study prepared by Fraunhofer Institute for Solar Energy Systems.
Fraunhofer, I. S. E., & Energiewende, A. (2015). Current and future cost of photovoltaics. Long-term Scenarios for Market Development, System Prices and LCOE of Utility-Scale PV systems. Agora Energiewende, 82.
Huang, S. (2021). Grand challenges and opportunities in photovoltaic materials and devices. Frontiers in Photonics, 2, 651766.
Jager-Waldau, A. (2023). Snapshot of photovoltaics- May 2023. EPJ Photovoltaics, 14, 23.
Nikolina, S. A. J. N. (2016). International renewable energy agency (IRENA).