Predictive current control implementation of Stand Alone PV inverter

Main Article Content

Mohamed Rida Bengourina
Linda Hassaine
Fateh Abdoune
Issam Abadlia

Abstract

In stand-alone photovoltaic (PV) systems, the main goal is to control the current that the inverter feeds to the load. In this paper, the performance of predictive current control (MPCC) is tested and evaluated for a stand-alone photovoltaic (PV) system. Our evaluation spans various current amplitudes and frequencies, aiming to demonstrate its robust performance and practical applicability. The MPCC method employs a discrete-time model of the system, enabling the prediction of future values of the load current for all potential volt-age vectors generated by the inverter. Implementing the MPCC strategy on RL (resistor-inductor) load alimented by a PV inverter offers the advantage of simplified implementation and significantly reduced computing time. Simulation and experimental results are presented to prove the efficiency and practical applicability of the proposed control. Both results conclusively demonstrate the high efficacy of MPCC in managing a stand-alone photovoltaic (PV) inverter across various current amplitudes and frequencies, ensuring reliable and robust performance

Article Details

How to Cite
[1]
M. R. . Bengourina, L. . Hassaine, F. . Abdoune, and I. . Abadlia, “Predictive current control implementation of Stand Alone PV inverter”, J. Ren. Energies, vol. 1, no. 1, pp. 271 -, Sep. 2024.
Section
special

References

Bose, B.K. (2000) Energy, environment, and advances in power electronics. IEEE Trans on Power Electronics, 15(4), 688–701. doi: https://doi.org/ 10.1109/63.849039.

Dadu, A,. Mekhilef, S. (2019) Lyapunov model predictive control to optimize computational bur-den, reference tracking and THD of three-phase four-leg inverter. IET Power Electronics, 12(05), 1061–1070. https://doi.org/10.1049/iet-pel.2018.5732.

Hassaine, L., Bengourina, M.R. (2020) Design and control technique for single phase bipolar H-bridge inverter connected to the grid. International Journal of Electrical and Computer Engineering, 10(03), 3057–3065. http://doi.org/10.11591/ijece.v10i3.pp3057-3065.

Kouro, S., Perez, M.A, Rodriguez, J., Llor, M.A., Young, H. A. (2015) Model predictive control: MPC’s role in the evolution of power electronics. IEEE Ind. Electron. Mag, 9(4), 8–21. doi: https://doi.org/ 10.1109/MIE.2015.2478920.

Mohamed, I.S., Zaid, S.A., Abu-Elyazeed, M.F., Elsayed, H.M. (2013) Classical methods and model predictive control of three-phase inverter with output LC filter for UPS applications. Paper presented at the 2013 International Conference on Control, Decision and Information Technologies (CoDIT).

Qin, L., Fang, Z.Z., Baoming, G. (2012) Pulse-Width-Amplitude-Modulated voltage-fed quasi-Z-source direct matrix converter with maximum constant boost. Paper presented at the Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

Rodriguez, J., Cortes, P. (2012) Predictive Control of Power Converters and Electrical Drives. John Wiley. United Kingdom.

Sharida, A., Bayhan, S., Abu-Rub, H., Fesli, U. (2024) Inverse Model Predictive Control for PowerElectronic Converters. IEEE Access, 12, 68485 – 68496. https://doi.org/10.1109/ACCESS.2024. 3395925.

Wang, L., Chai, S., Yoo, D., Gan, L., Ng, K. (2015) PID and Predictive Control of Electrical Drives and Power Converters using MATLAB / Simulink. John Wiley. Singapore.

Wensheng, S., Zhixian, D., Shunliang, W., Xiaoyun, F. (2016) A Simple Model Predictive Power Control Strategy for Single-Phase PWM Converters With Modulation Function Optimization. IEEE Transactions on Power Electronics, 31(07), 5279–5289. doi: https://doi.org/10.1109/TPEL.2015. 2481323.

Xiaowei, Y., Haitao, H., Hai, H., Yunjiang, L., Zhengyou, H. (2021) A Quasi-Resonant Extended State Observer-Based Predictive Current Control Strategy for Three-Phase PWM Rectifier. IEEE Ind Electron Mag, 69(12), 13910–13917. doi: https://doi.org/ 10.1109/TIE.2021.3137441.