Modeling of VAWT-AFPMSG using the finite element method for wind energy conversion
Main Article Content
Abstract
In the context of the global energy transition and decarbonization efforts, wind energy has become a crucial component of sustainable power generation. Among the various electrical generators utilized, the Axial Flux Permanent Magnet Synchronous Generator has garnered considerable attention due to its significant advantages in wind energy conversion. Its axial configuration is particularly advantageous for applications where space and weight are critical factors. This article presents a detailed modeling and simulation of a vertical axis wind turbine system based on the Axial Flux Permanent Magnet Synchronous Generator. The design process began with the development of a 3D electromagnetic model in ANSYS Maxwell through RMxprt model, where both geometric and magnetic characteristics were defined. In parallel, MATLAB/Simulink was employed to model the wind turbine and implement a Maximum Power Point Tracking algorithm to maximize energy capture and field-oriented control. A co-simulation in Twin Builder integrating Maxwell and Simulink was developed to ensure realistic performance evaluation, enabling dynamic interaction between mechanical and electrical subsystems. This approach provided an effective platform for evaluating system performance in conjunction with the electromagnetic modeling of power electronic circuits.
Article Details
Section
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
How to Cite
References
Adelekan, O. A., Ilugbusi, B. S., Adisa, O., Obi, O. C., Awonuga, K. F., Asuzu, O. F., & Ndubuisi, N. L. (2024). Energy transition policies: a global review of shifts towards renewable sources. Engineering Science & Technology Journal, 5(2), 272-287. https://doi.org/10.51594/estj.v5i2.752.
Ahmadi, M., Poshtan, J., & Poshtan, M. (2012). Modelling squirrel cage induction motors using finite element method. 2012 IEEE International Conference on Intelligent Control, Automatic Detection and High-End Equipment, 186-191. https://doi.org/10.1109/ICADE.2012.6330124.
Ashrafzadeh, S. A., Ghadimi, A. A., Jabbari, A., & Miveh, M. R. (2024). Optimal design of a modular axial-flux permanent-magnet synchronous generator for gearless wind turbine applications. Wind Energy, 27(3), 258-276. https://doi.org/10.1002/we.2887.
Azevedo, I. A., & Barros, L. S. (2021). Comparison of control strategies for squirrel-cage induction generator-based wind energy conversion systems. 2021 14th IEEE International Conference On Industry Applications (INDUSCON), Sao Paulo, Brazil, 790-796. DOI: 10.1109/INDUSCON51756.2021.9529574.
Barmpatza, A. C. (2023). The neutral voltage difference signal as a means of investigating eccentricity and demagnetization faults in an AFPM synchronous generator. Machines, 11(6), 647. https://doi.org/10.3390/machines11060647.
Bouhafs, L., Tamalouzt, S., & Bouzida, A. (2025). A novel approach to feature extraction from gear condition monitoring signals. Acta Polytechnica, 65(2), 167-176. https://doi.org/10.14311/AP.2025.65.0167.
Boztas, A., Demirbas, O., & Sahin, M. E. (2021). Investigation of vertical axis wind turbines and the design of their components. Turkish Journal of Electromechanics and Energy, 6(2), 64-72.
Burton, T., Jenkins, N., Sharpe, D., & Bossanyi, E. (2011). Wind Energy Handbook. John Wiley & Sons.
Cabuk, A. S., & Üstün, Ö. (2023). Thermal optimization of a radial flux permanent magnet synchronous motor with axial division. Turkish Journal of Electrical Power and Energy Systems, 3(2), 61-68. https://doi.org/10.5152/tepes.2023.23014.
Esenboga, B. (2024). Comparative performance analysis of PMSGs using various core materials for wind turbine application. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 7(5), 2217-2231. https://doi.org/10.47495/okufbed.1454674.
Farhan, N. S., Humod, A. T., & Hasan, F. (2021). Field oriented control of AFPMSM for electrical vehicle using adaptive neuro-fuzzy inference system (ANFIS). Eng. Technol. J, 39(10), 1582-1571. https://doi.org/10.30684/etj.v39i10.1969.
Hölsch, L., Brosch, A., Steckel, R., Braun, T., Wendel, S., Böcker, J., & Wallscheid, O. (2024). Insights and challenges of co-simulation-based optimal pulse pattern evaluation for electric drives. IEEE Transactions on Energy Conversion, 39(3), 2094-2105. https://doi.org/10.1109/TEC.2024.3374962.
Lakshmi, N. S., Krithik, E. N., Santhoshkumar, V., Santhosh, A. P., & Prabhu, A. (2025). Design and development of PMSM drive controller for electric Go-Kart. Proceedings of the 2025 International Conference on Advanced Research in Electronics and Communication Systems (ICARECS-2025), 274-287. DOI: 10.2991/978-94-6463-754-0_25.
Liu, C., Yang, G., Wang, Y., Lei, G., & Zhu, J. (2025). Comparative study of radial, axial and transverse flux generators with hybrid cores for 5 kW wind generator. Journal of Electrical Engineering & Technology, 20(5), 3123-3134. https://doi.org/10.1007/s42835-025-02231-4.
Mersha, T. K., & Du, C. (2021). Co-simulation and modeling of PMSM based on ANSYS software and Simulink for EVs. World Electric Vehicle Journal, 13(1), 4. https://doi.org/10.3390/wevj13010004.
Sahin, M. E., Sharaf, A. M., Okumus H. I. (2012). A novel filter compensation scheme for single phase-self-excited induction generator micro wind generation system. Scientific Research and Essays, 7(34). https://doi.org/10.5897/SRE11.708.
Tabassum, A. A., Cho, H. M., & Mahmud, M. I. (2024). Essential features and torque minimization techniques for brushless direct current motor controllers in electric vehicles. Energies, 17(18), 4562. https://doi.org/10.3390/en17184562.
Veers, P., Bottasso, C. L., Manuel, L., Naughton, J., Pao, L., Paquette, J. et al. (2023). Grand challenges in the design, manufacture, and operation of future wind turbine systems. Wind Energy Science, 8(7), 1071-1131. https://doi.org/10.5194/wes-8-1071-2023.
Zhu, X., Qi, G., Han, P., Wang, Y., Hua, W., Huang, J., Li, X., & Cui, Y. (2023). Performance analysis of hts armature axial flux magnetic field modulation direct drive wind generator. IEEE Transactions on Applied Superconductivity, 33(5), 1-8, 5202508. https://doi.org/10.1109/TASC.2023.3266717.