Design and simulation of shortcut current MPPTracking technique to control boost converter
Main Article Content
Abstract
This paper presents the control of boost converter using MPPT techniques in photovoltaic system. The short circuit current technique is characterized by its simplicity and easily realized. The technique is based on the measure of the short circuit current of panel considered as a reference, and the comparison with the real current is helpful to create the control pulse of the DC/DC converter. We realize the Boost converter using IGBT 'IRGPC60' transistor protected by RCD (Resistance, Capacitor and Diode) circuit. The galvanic isolation is achieved by photo coupler CNY18. Experimental results are measured using Dspace interface board to verify the validity of the presented technique.
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
