Comparative Numerical Study on Nanofluid-Based Cooling Strategies in PVT Systems for Improved Thermodynamic and Electrical Performance
Main Article Content
Abstract
The study presents an optimization technique to improve photovoltaic-thermal module's performance by analyzing cooling effects facilitated by mono and hybrid nanofluids. The investigation evaluates the thermal performance of silver-water (Ag/water), aluminum oxide-water (Al2O3/water), and hybrid combinations of magnesium oxide and copper oxide with multi-walled carbon nanotube-water (MgO-MWCNT/water and CuO-MWCNT/water) nanofluids. The prototype model integrates four riser tubes and an absorber plate to facilitate heat transfer mechanisms. A novel approach is employed wherein each consecutive tube’s inlet is rotated by 180° to ensure uniform heat distribution across the solar panel absorber. Numerical simulations using computational fluid dynamics were conducted in ANSYS Fluent to assess the cooling effects of circulating nanofluids throughout the absorber plate. Results indicate that optimal electrical efficiency enhancements are achieved at a fluid velocity of 0.24 m/s with Al2O3/water at 10.7%, Ag/water at 10.78%, MgO-MWCNT/water at 10.69%, and CuO-MWCNT/water at 10.68%. The exergy efficiency values for the nanofluids, at the same flow rate, are 11.8% for Al2O3/water, 12.2% for Ag/water, 11.2% for MgO-MWCNT/water, and 11.4% for CuO-MWCNT/water. The results demonstrate the superior thermal and electrical performance of Ag/water, suggesting its viability for improving photovoltaic efficiency and supporting sustainable energy production.
Article Details
Section
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
How to Cite
References
Corbin, C. D., & Zhai, Z. J. (2010). Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic-thermal collector system. Energy and Buildings, 42(1), 76–82. https://doi.org/10.1016/j.enbuild.2009.07.013.
Davarnejad, R., & Jamshidzadeh, M. (2015). CFD modeling of heat transfer performance of MgO-water nanofluid under turbulent flow. Engineering Science and Technology, an International Journal, 18(4), 536–542. https://doi.org/10.1016/j.jestch.2015.03.011.
Drew, D. A., & Passman, S. L. (1999). Theory of multicomponent fluids. Applied Mathematical Sciences, 135. 1st ed. Springer New York, NY. https://doi.org/10.1007/b97678.
Ebaid, M. S. Y., Ghrair, A. M., & Al-Busoul, M. (2018). Experimental investigation of cooling photovoltaic (PV) panels using (TiO2) nanofluid in water-polyethylene glycol mixture and (Al2O3) nanofluid in water-cetyltrimethylammonium bromide mixture. Energy Conversion and Management, 155, 324–343. https://doi.org/10.1016/j.enconman.2017.10.074.
Hamdan, M., & Kardasi, K. (2017). Improvement of photovoltaic panel efficiency using nanofluid. The International Journal of Thermal & Environmental Engineering, 14(2), 143–151. https://doi.org/10.5383/ijtee.14.02.008.
Huminic, G., & Huminic, A. (2020). Entropy generation of nanofluid and hybrid nanofluid flow in thermal systems: A review. Journal of Molecular Liquids, 302, 112533. https://doi.org/10.1016/j.molliq.2020.112533.
Hussein, H., Numan, A., & Abdulmunem, A. (2017). An experimental investigation on the performance enhancement of photovoltaic/thermal panel using a tracking system and nanofluid (Al2O3). Engineering and Technology Journal, 35(5A), 493–508. https://doi.org/10.30684/etj.35.5A.9.
Hussien, H. A., Hasanuzzaman, M., Noman, A. H., & Abdulmunem, A. R. (2014). Enhance photovoltaic/thermal system performance by using nanofluid. 3rd IET International Conference on Clean Energy and Technology (CEAT) 2014, Kuching, 1–5. https://doi.org/10.1049/cp.2014.1515.
Ibrahim, A., Ramadan, M. R., Khallaf, A. E. M., & Abdulhamid, M. (2023). A comprehensive study for Al2O3 nanofluid cooling effect on the electrical and thermal properties of polycrystalline solar panels in outdoor conditions. Environmental Science and Pollution Research, 30(49), 106838–106859. https://doi.org/10.1007/s11356-023-25928-3.
Kell, G. S. (1975). Density, thermal expansivity, and compressibility of liquid water from 0 °C to 150 °C : Correlations and tables for atmospheric pressure and saturation reviewed and expressed on 1968 temperature scale. Journal of Chemical & Engineering Data, 20(1), 97–105. https://doi.org/10.1021/je60064a005.
Khanjari, Y., Pourfayaz, F., & Kasaeian, A. B. (2016). Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal system. Energy Conversion and Management, 122, 263–278. https://doi.org/10.1016/j.enconman.2016.05.083.
Kozak, T., Maranda, W., Napieralski, A., De Mey, G., & De Vos, A. (2009). Influence of ambient temperature on the amount of electric energy produced by solar modules. 2009 MIXDES–16th International Conference on Mixed Design of Integrated Circuits & Systems, Lodz, Poland, 351–354. https://ieeexplore.ieee.org/document/5289580.
Menter, F. R. (1993). Zonal two equation k-w turbulence models for aerodynamic flows. 23rd Fluid Dynamics, Plasmadynamics, and Lasers Conference, Orlando, FL. American Institute of Aeronautics and Astronautics, 1993-2906. https://doi.org/10.2514/6.1993-2906.
Muneeshwaran, M., Srinivasan, G., Muthukumar, P., & Wang, C. C. (2021). Role of hybrid-nanofluid in heat transfer enhancement – A review. International Communications in Heat and Mass Transfer, 125. https://doi.org/10.1016/j.icheatmasstransfer.2021.105341.
Murtadha, T. K., & Hussein, A. A. (2022). Optimization the performance of photovoltaic panels using aluminum-oxide nanofluid as cooling fluid at different concentrations and one-pass flow system. Results in Engineering, 15. https://doi.org/10.1016/j.rineng.2022.100541.
Saffarian, M. R., Moravej, M., & Doranehgard, M. H. (2020). Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid. Renewable Energy, 146, 2316–2329. https://doi.org/10.1016/j.renene.2019.08.081.
Sathyamurthy, R., Kabeel, A. E., Chamkha, A., Karthick, A., Muthu Manokar, A., & Sumithra, M. G. (2021). Experimental investigation on cooling the photovoltaic panel using hybrid nanofluids. Applied Nanoscience (Switzerland), 11(2), 363–374. https://doi.org/10.1007/s13204-020-01598-2.
Selmi, M., Al-Khawaja, M. J., & Marafia, A. (2008). Validation of CFD simulation for flat plate solar energy collector. Renewable Energy, 33(3), 383–387. https://doi.org/10.1016/j.renene.2007.02.003.
Shang, D.-Y. (2012). Free convection film flows and heat transfer. Heat and Mass Transfer (HMT). 2nd ed. Springer Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-28983-5.
Tian, M. W., Khetib, Y., Yan, S. R., Rawa, M., Sharifpur, M., Cheraghian, G., & Melaibari, A. A. (2021). Energy, exergy and economics study of a solar/thermal panel cooled by nanofluid. Case Studies in Thermal Engineering, 28. https://doi.org/10.1016/j.csite.2021.101481.
Usama Siddiqui, M., Arif, A. F. M., Kelley, L., & Dubowsky, S. (2012). Three-dimensional thermal modeling of a photovoltaic module under varying conditions. Solar Energy, 86(9), 2620–2631. https://doi.org/10.1016/j.solener.2012.05.034.
Wu, S. Y., Guo, F. H., & Xiao, L. (2014). A Review on the Methodology for Calculating Heat and Exergy Losses of a Conventional Solar PV/T System. International Journal of Green Energy, 12(4), 379–397. https://doi.org/10.1080/15435075.2013.840833.
Xu, Z., & Kleinstreuer, C. (2014). Concentration photovoltaic-thermal energy co-generation system using nanofluids for cooling and heating. Energy Conversion and Management, 87, 504–512. https://doi.org/10.1016/j.enconman.2014.07.047.
Xuan, Y., & Roetzel, W. (2000). Conceptions for heat transfer correlation of nanofluids. International Journal of Heat and Mass Transfer, 43(19), 3701–3707. https://doi.org/10.1016/S0017-9310(99)00369-5.
Yu, W., & Choi, S. U. S. (2003). The role of interfacial layers in the enhanced thermal conductivity of nanofluids: A renovated Maxwell model. Journal of Nanoparticle Research, 5, 167–171. https://doi.org/10.1023/A:1024438603801.