Performances of Vector Control of Brushless Doubly-Fed Induction Generator Incorporate in Wind Energy Conversion System with TSR MPPT
Main Article Content
Abstract
Currently, variable speed wind systems based on the Brushless Doubly-Fed Induction Machine (BDFIM) are the most used in Wind Energy Conversion System (WECS). The main features of BDFIM are high reliability due to its brushless operating, lower capital and operational costs. This work presents a field-oriented control scheme for a BDFIG acting as a variable-speed generator. The presented vector control is determined on the power-winding stator-flux frame and can be employed to control both the speed and the reactive power. In addition, use of wind speed sensors by an anemometer, and maximize wind energy extraction Tip Speed Ratio (TSR) Maximum Power Point Tracker (MPPT) is proposed. Several simulation results under different operating conditions are provided to prove the effectiveness of the presented scheme. The obtained results show the efficiency and validity of the proposed control strategy.
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
References
Liu, G., Wang, S., & Zhang, R. Modeling and Control of BDFG-based Wind Power
Generation Systems under Grid Voltage Sag. In 2009 Asia-Pacific Power and Energy
Engineering Conference (pp. 1-5). IEEE. (2009, March).
Serhoud, H., & Benattous, D. Simulation of grid connection and maximum power point
tracking control of brushless doubly-fed generator in wind power system. Frontiers in
Energy, 7(3), 380-387. (2013).
Eltamaly, A. M., & Farh, H. M. Maximum power extraction from wind energy system
based on fuzzy logic control. Electric Power Systems Research, 97, 144-150. (2013).
YARAMASU, Venkata et WU, Bin. Basics of Wind Energy Conversion Systems
(WECS),Model predictive control of wind energy conversion systems. John Wiley & Sons, 2016
Tir, Z., & Abdessemed, R. Control of a wind energy conversion system based on brushless doubly fed induction generator. Revue des Energies Renouvelables, 17(1), 55-69. (2014).
Viktor.P,2017, Electric Generators,Renewable Energy Systems: Simulation with Simulink® and SimPowerSystemsTM. Crc Press, 2016.
Lobo, F. J. P. COMMANDE DE LA BDFM. Modélisation, conception et commande d'une machine asynchrone sans balais doublement alimentée pour la génération à vitesse variable (Doctoral dissertation). (2003).
JOHN W & SONS,I, Fundamentals of Wind Energy Conversion System Control,POWER CONVERSION AND CONTROL OF WIND ENERGY SYSTEMS, R. Abhari J. Anderson F. Cañavero , Canada,(pp32-36). 2011.
Asri, A,"Intelligent maximum power tracking control of a PMSG wind energy conversion system." Asian Journal of Control 21.4 (2019)
Kumar, D.,& Chatterjee, K. A review of conventional and advanced MPPT algorithms for wind energy systems. Renewable and sustainable energy reviews, 55, 957-970. (2016).
Rahab, A., Senani, F., & Benalla, H. Direct power control of brushless doubly-fed induction generator used in wind energy conversion system. International Journal of Power Electronics and Drive System (IJPEDS), 8(1), 417-433. (2017).
Trejos-Grisales, L., Guarnizo-Lemus, C., & Serna, S. Overall description of wind power systems. Ingeniería y Ciencia, 10(19), 99-126. (2014).